Thursday, February 10, 2011
Jailbreak iOS 4.1 iPhone, iPod, iPad [Windows/Mac/Linux][How To]
Update : Added Sn0wbreeze and Custom iOS 4.1 Firmwares at the end
Here are the different guides to jailbreak your iDevice running iOS 4.1 :
MAC - Pwnage Tool
- AppleTV 2G
- iPad (firmware 3.2.2)
- iPod touch 4G
- iPod touch 3G
- iPhone4
- iPhone 3GS
- iPhone 3G
WINDOWS / MAC / LINUX - Greenpois0n
- iPhone 4
- iPhone 3GS
- iPhone 3G (soon with RC5 release)
- iPod touch 2G
- iPod touch 3G
- iPod touch 4G
- iPad (firmware 3.2.2)
WINDOWS / MAC - limera1n
- AppleTV 2G
- iPad (firmware 3.2.2)
- iPod touch 4G
- iPod touch 3G
- iPhone4
- iPhone 3GS
WINDOWS - Redsn0w 0.9.6
- iPhone 3G
- iPod touch 2G
WINDOWS - Sn0wbreeze 2.1
- iPhone 3G
- iPhone 3Gs
- iPhone 4
- iPod Touch 2G
- iPod Touch 3G
- iPod Touch 4G
- iPad (both models)
- Apple TV 2G
2:06 PM 0
Monday, February 7, 2011
Update iPhone 4 to 4.2.1and Preserve Baseband 01.59.00 [Full Guide]
This tutorial will show you how to upgrade your iPhone 4 to iOS 4.2.1 without upgrading its baseband using TinyUmbrella for Windows.
Step One
Step Two
Double click the downloaded TinyUmbrella.exe file.
If you get a Windows Firewall notification, check both boxes and click Allow Access.
Step Three
Make sure the device is connected, and Umbrella has detected the type of device and its firmware.
**If you haven't already saved your iOS 4.2.1 SHSH blobs then click Save SHSH. Make sure they successfully save before continuing.
Step Four
Hit Start TSS Server and make sure you receive no errors.
Once The TSS Server is "running" successfully, umbrella will kill iTunes. Leave TinyUmbrella Open. You can double check to see if the TSS server is running under the Log tab.
If you do receive an error, DO NOT continue. Your restore will not work if the TSS server cannot be started.
Step Five
Open iTunes by doubling clicking its icon in the dock.
Hold down the Shift key and click Restore
Select your iPhone 4.2.1 firmware file from the popup window that appears and click Open.
Click Restore to begin restoring your device.
Step Six
iTunes should give you error 1013. This is what we wanted, as it notes the baseband has not updated :) Click Ok and close iTunes.
If you get a 16XX error then try entering DFU and go to step 5.
If your restore does NOT end in a 1013, it means your baseband was updated. This is likely because you did not have the TSS server running OR you updated without TinyUmbrella OR you are working with a device OTHER than iPhone 4.
Step Seven
Place your iPhone into DFU mode by holding down both the Power and Home buttons for ten seconds, then release the Power button and continue holding the Home button for another 5 seconds. You can find help with DFU mode here.
Step Eight
You are now ready to follow our Greenpois0n tutorial which will jailbreak your device and bring it out of DFU mode. **Note: You do not need to put the device into DFU mode after press the Jailbreak button in Greenpois0n as we have already done this :)
Step Nine
Your iPhone will now be on 4.2.1 with the 1.59.00 baseband! (Which means you can now unlock using this tutorial)
8:49 AM 0
Jailbreak 4.2.1 Greenpois0n for Windows [Full Guide]
This is how to jailbreak iPhone 3GS and iPhone 4 using Greenpois0n for Windows. Greenpois0n supports the iOS 4.1 and iOS 4.2.1 firmware. Use Limera1n if you want to jailbreak iOS 4.0, iOS 4.0.1, iOS 4.0.2.
Note: Do not update to iOS 4.2.1 if you need the unlock.
Ultrasn0w does not support that baseband yet. The only exception is the iPhone 4. You can update to iOS 4.2.1 without upgrading your baseband by following this tutorial.
Step One
Open your web browser of choice and navigate to http://www.greenpois0n.com. Click the Windows link at the bottom of the screen.
Step Two
When prompted save the download to your desktop
Step Three
Double click the downloaded gp_win_rc5_b2.zip file then drag the greenpois0n.exe file to the desktop.
Double greenpois0n.exe from the desktop to launch the application
Step Four
Power off your iPhone then click the large Prepare to Jailbreak (DFU) button
Step Five
You will now be instructed on how to place your iPhone into DFU mode. You can get help with this here.
You will be asked to press and hold the sleep button for 2 seconds.
Continue holding sleep; press and hold home for 10 seconds.
Release sleep button; continue holding home for 15 seconds.
Step Six
Once your iPhone is successfully in DFU mode you may click the Jailbreak button.
Step Seven
Greenpois0n will now jailbreak your device
Step Eight
Click the Quit button once the software application has completed.
You'll notice some verbose mode text scrolling on your device.
Step Nine
After the iPhone restarts you'll notice a new Loader application on your Springboard. Press to launch it.
Step Ten
Press to select Cydia then press the large Install Cydia button that appears.
Step Eleven
Once Cydia has installed successfully you can remove Loader by pressing the Options button then the large red Remove Loader.app button.
Step Twelve
Restart your iPhone then run Cydia. Let it do all the necessary updates then follow our Unlock tutorial if possible for your device.
7:34 AM 0
Sunday, January 9, 2011
Jailbreak PS3 Running 3.55 Firmware [HOW TO]
Two days ago we have showed you a video presenting the jailbreak for PlayStation 3 (PS3), this jailbreak is a shared success between fail0verflow team and Geohot, after that I have been asked a lot about the full step by step guide to jailbreak PS3 using Geohot method.
How To: Jailbreak PS3 on 3.55 only
STEP 1: Plug a USB stick into your computer
STEP 2: Create a folder in the root of the USB stick called PS3
STEP 3: Create a folder inside the PS3 folder called UPDATE
STEP 4: Download [Mirror] or http://geohot.com/jailbreak.zip
STEP 5: Unzip Jailbreak.zip to PS3UPDAT.PUP
STEP 6: Move PS3UPDAT.PUP to the directory UPDATE that you just created on the USB stick
STEP 7: Plug the USB stick into your PS3
STEP 8: Navigate to Settings Tab
STEP 9: Choose System Update
STEP 10: Choose Update via Storage Media
STEP 11: It will say it found Version 3.55-jb
STEP 12: Choose OK
STEP 13: Accept Conditions and Install Update
STEP 14: After less than a minute, your PS3 will update, beep 4 times then shut down.
STEP 15: Power up your PS3 (You will have to do it on the console and not by the controller)
STEP 16: Your PS3 is now jailbroken!
How To: Install Packages
STEP 1: Plug your USB stick into your computer
STEP 2: Drop http://geohot.com/test.pkg into the root of the USB stick [Mirror]
STEP 3: Plug your USB stick into your PS3
STEP 4: Navigate to the Game Tab
STEP 5: Choose Install Package Files
STEP 6: Select the test.pkg
STEP 7: After it installs you will find the test package from geohot installed below the Install Package Files folder
STEP 8: Wait for more packages to be created by the PS3 community
Note: With the above geohot's PS3 jailbreak guide, you won't be able to play backup games or pirated games or whatever you choose to call them. You can install packages with the provided installer. More packages will be coming from the PS3 jailbreak community in the coming weeks and months.
9:27 AM 2
Sunday, December 26, 2010
Jailbreak 4.2.1 Untethered with Redsn0w 0.9.7b3 iPhone 4, 3GS, iPod touch 4G, 3G [How to Guide]
These are instructions on how to untether your jailbreak of iOS 4.2.1 using the iPhone Dev-Team's 'backup plan' method on Mac OS X.
Currently this very first beta1 is limited to iPhone4, iPad, and iPod touch 4G. Bluetooth functionality is disabled for the time being until some issues are resolved.
Requirements:
You will need to have access to the iOS 4.2b3 ipsw and your iOS 4.2b3 SHSH blobs saved. You also already need to be jailbroken on iOS 4.2.1. MAKE SURE YOU BACKUP BEFORE ATTEMPTING THIS AS IT IS A BETA!
Step One
Create a folder called Pwnage on your desktop and in it place:
- Xcode (also found on your Mac OS X Install DVD)
- MacPorts
- Usbmuxd
- RedSn0w 0.9.7b
- iOS 4.2.1 (iPhone, iPad, iPod touch)
- iOS 4.2b3 *Only iPhone developers have legit access to this firmware
Step Two
Double click the Xcode dmg to mount it then double click the pkg to install the application.
Step Three
Double click the MacPorts dmg to mount it then double click the pkg to install the application.
Step Four
Open Terminal from Applications:Utilities then input the following. If asked for a password then enter your administrator password.
sudo ports install libusb
Once libusb has installed then input the following command: sudo ports install cmake
Once cmake has finished installing input the following command: sudo ports install pkgconfig
Step Five
Double click the downloaded usbmuxd archive to extract it.
Return to the Terminal window and input the following commands to install usbmuxd: cd ~/Desktop/Pwnage/usbmuxd-1.0.6
mkdir build
cd build
cmake ..
make
sudo make install
Step Six
Disconnect and then reconnect your jailbroken iPhone to the computer via USB. Make sure OpenSSH is installed through Cydia then input the following into the Terminal window:
cd ~/Desktop/Pwnage/usbmuxd-1.0.6/python-client/
chmod +x tcprelay.py
./tcprelay.py -t 22:2222
*Make sure to leave this running as you continue the tutorial...
Step Seven
Double click the RedSn0w archive to extract it. Then launch RedSn0w from the extracted folder.
Click the Browse button
Select the iOS 4.2.1 ipsw from the Pwnage folder on your Desktop and click Open.
Click the Next button to continue.
RedSn0w will now prepare the jailbreak data.
You will now be presented with a list of checkboxes.
Select Jailbreak Monte (untether) from the list of checkboxes. You will be asked to select the iOS 4.2b3 ipsw from the Pwnage folder on your desktop then click Open. Click Next to continue.
Please plug your iPhone into the computer and make sure its OFF then click the Next button
RedSn0w will now guide you through the steps to get into DFU mode. You can find more help with DFU mode here
Hold down both the Home button and the Power button for 10 seconds.
Release the Power button and continue holding the Home button until RedSn0w detects the device.
RedSn0w will prepare Jailbreak Monte files, exploit with Limera1n, Upload RAM Disk and Kernel, and Send Jailbreak Monte files.
Notice that during this time usbmuxd will facilitate the connection to your device.
RedSn0w will inform you when it has completed successfully.
Download Redsn0w 0.9.7b3 for Mac OS X
Download iOS 4.2.1 for iPhone, iPad and iPod touch
Download iTunes 10.1.1 for Windows / Mac OS X
2:59 AM 17
